Products

Sub Categories

  • Filter
  Name SKU Description Category
NAN0007-NETWORK INTELLIGEN TESTER (PLUS PING TESTER) Made in Korea Cable Testers
NAN004-CE-1000V2 Cable Expert w/ reporting software Cable Expert (Model No.: CE-1000) NanoTronix Cable Expert (Model No.: CE-1000) is the all-in-one and easy-to-use network qualification unit measuring logical network performance and physical condition of network cables. It allows network engineers to install and maintain efficiently local area networks (LAN) with 10BASE-T and 100BASE-TX based on the Ethernet protocol. For measuring logical network performance, it provides the round-trip time (RTT) testing to measure network speed under dynamic... Cable Testers
TES0073- 46 CAT-5 Lan Cable Tester (w/distance to fault) Tests : UTP. FTP. Coax cables, two, three, or four wire pairs in twisted pair cables and test all category UTP cables and hardware. Verify end-to-end connectivity per EIA/TIA 568 wiring standard. Detects wiring problems : Opens, Shorts, miswires (Crossed, Reversed, Split pair). Locates wiring/connection errors (distance to the open or shout) Measures cable length Cable Testers
TEN902-LC-90 BASIC LAN CABLE TESTER - LCD display. - Test pin configuration for 10/100 base-T cable, 10 base-2 cable, RJ45/RJ11 modular cables, AT and T 258 A cable, EIA/TIA 568A/568B cables and Token Ring Cables etc. - Verify cable continuity, opens, shorts and miss-wired. - Auto and manual scan function. - Ground wire test. - Locked status wire function. - Detected defective wire warning (buzzer). - Function Keys: ON/OFF, Test, Auto, Lock, Manual. - Low battery indication. Cable Testers
TEN901-TM-903v2 MUTIMEDIA LAN CABLE/COAX/UTP/RJ45 TESTER - Detects opens, shorts, miswires and split pairs on the twisted pair cabling. - Measures length. - Low battery detector. - Auto backlit. - Auto power off. Cable Testers
ALP201-SVM2V2 SURFACE STATIC METER-FROM USA Manufactured in the USA A handheld static electricity meter used to measure the magnitude and polarity of static charge on objects or surfaces. It is typically held 1” (25 mm) from the test surface. On metallic or conductive surface, the meter measures the voltage on the surface. Static meters(Surface)
TEN015-Gauss Magnetic Field Meter Product Description Can measure DC and AC(40-500Hz) magnetic field. 2. DC N/S polarity of magnetic field display. 3. After machine component are processed, remain the magnetism to measurement. 4. Magnetic application products, the intensity of magnetic field measurement. 5. After processing the stress with stainless steel material, remain the measurement of the magnetism 6. Magnetic force measurement of the magnetisable material. 7. Various steel products brought magnetic measurement... Gauss meters
ALP101-GM1-STV2 DIGITAL DC GAUSSMETER -MANUFACTURED IN USA The Gaussmeter Model GM1-ST measures the field of even the strongest magnet (to 20kG) down to fine resolution (0.1G). Features rapid turn-on and fast update. This model supersedes the MD1-ST, which had no auto-zero Gauss meters
ALP102-GM2V2 ST DC GAUSS METER MODEL (UP TO 30K GAUSS) W/ ST UNIVERSAL PROBE Manufactured in the USA  Laboratory gaussmeter that reads field, true peak field, AC field, and has an alarm. Range is 30,000 gauss. ST (range: 0.1-30k G): Universal (flexible), ST Axial, ST Thin-Transverse (non-flexible) Gauss meters
LUT0338-FC-2700 2.7GHz Frequency Counter Frequency Counter is a low cost, high precision, low power device with optional computer interface (RS-232), data hold, data record and relative measurement capabilities. This unit is a microprocessor based bench-top tool with a large LCD display, battery powered piece of test equipment that is ideal for VHF, UHF and CB frequencies. The FC-2700 is lightweight, yet has a wide range of operation temperatures and humidities. Frequency Counter
OPT100-OPTOELECTRONICS CUB PORTABLE FREQUENCY COUNTER Cub Frequency Counter The Optoelectronics Cub Frequency Counter is ideal for any two-way communication test application or general purpose frequency measurements. If you're looking for a low cost handheld frequency counter, look no further than the Optoelectronics Cub Frequency Counter.                    Features 1MHz - 2.8GHz frequency range 9 digit LCD display for better visibility and... Frequency Counter
STY006 -UVC 254NM METER 220~275 NM from USA Product Description These instruments are designed to measure ultraviolet light in the range from 220 to 275 nanometers (UVC), 380 to 320 nanometers (UVA) and 280 to 400 nanometers (UVAB). The good illumination range of each kind of meter allow users to conduct the most precise quantitative measurements of ultraviolet radiation. Ultra-Violet meters (UV meters)
STY005-UVA METER 320~380 365NM from USA Product Description These instruments are designed to measure ultraviolet light in the range from 220 to 275 nanometers (UVC), 380 to 320 nanometers (UVA) and 280 to 400 nanometers (UVAB). The good illumination range of each kind of meter allow users to conduct the most precise quantitative measurements of ultraviolet radiation. Ultra-Violet meters (UV meters)
STY004 -UVAB METER 290~370 365NM from USA Product Description These instruments are designed to measure ultraviolet light in the range from 220 to 275 nanometers (UVC), 380 to 320 nanometers (UVA) and 280 to 400 nanometers (UVAB). The good illumination range of each kind of meter allow users to conduct the most precise quantitative measurements of ultraviolet radiation. Ultra-Violet meters (UV meters)
TEN984-POCKET, POCKET, UVAB 290~390NM UV LIGHT METER - 3 3/4 digits LCD with backlit maximum reading 3999. - Data hold. - Low battery indication. - Zero function. - Over indicator: Display shows "OL". - Highly reliable direct reading Instrument designed expressly for measuring light intensity at thewafer plane of mask aligners. - UV curing light sources, and any other UV light source. Ultra-Violet meters (UV meters)