You have 0 items in your cart.
Products
Sub Categories
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
CAX0024B-CHAUVIN ARNOUX 6292 200A ADVANCED MICRO-OHM METER (ORIGIN:FRANCE)
|
Advantages ● Resolution: 0.1 μΩ ● Test current adjustable up to 200 A ● Automatic mode: 50 A, 100 A, 150 A and 200 A ● Unlimited test duration up to 100 A ●Safe measurements: Both Sides Grounded (BSG mode) ● Internal cooling system ● Storage of up to 8,000 measurements ● Site-proof casing for difficult environments Description The C.A 6292 is supplied in a site-proof casing with clearly-identified connection terminals to limit the risk of errors while also... | Milli-Ohm meter/Micro-Ohm meters |
|
|
|
LUT0188B-DIGITAL HANDHELD MICRO-OHM METER-2014-1 YEAR WARRANTY | FEATURES* 4 terminal devices for accurate measurement of very low resistance.* Ideal for measuring the resistance of components precisely.* Ideal for testing protective conductors, lightning conductors and welded points.* Maximum test current is 10A ( 60000uΩ range only ).* Have two working mode , Resistive and Inductive mode, Normal is resistive mode.* Good / Fail set-function for input quality control.* Built-in in buzzer sound (GOOD STATUS) to assist the Q.C. judgment.* Especial... | Milli-Ohm meter/Micro-Ohm meters |
|
|
|
SEW0029-KKINSTRUMENTS DLRO MICRO-OHM TESTER (REPLACED MEGGER DLRO 10)
|
FEATURES ● Microprocessor-controlled.● Measure down to 1μΩ.● 6 ranges from 2.000mΩ to 200.0Ω.● Maximum resolution of 1μΩ.● Three test currents with over-temperature protection.● Four terminal measurement.● Protection against inadvertent connection to over- voltage. (crow bars for current and voltage)● Clear & large LCD.● Potential lead resistance and current lead resistance checks.● "Full-featured” EnerSave™ Inside.● EnerSave™... | Milli-Ohm meter/Micro-Ohm meters |
|
|
|
TEN150-DIGITAL BASIC HANDHELD MILLIOHM METER | 3-1/2 digit LCD display with maximum reading of 2000. Low battery indication. Zero adjustment: External zero adjustment control. Very low impedance measurement, four-wire type, one pair insulated clip. Wide measurement range 1 milliohm to 20k Ohm in six switchable steps. Fuse protection: 2 Amp/250Volt (5mm x 20mm), fast minimum interrupt ratings 1500A. Function keys: D-H switch lockup readings for LCD display. Dimensions: 160mm (L) x 100mm (W) x 52mm (D) Weight: 700g approx. | Milli-Ohm meter/Micro-Ohm meters |
|
|
|
PRO0037-710 Micro-Ohmmeter with USB Interface | Maximum test current of 10A (60 mΩ) Best resolution of 1μΩ, (accuracy 0.05%) Measures resistive and inductive materials Selection of 6 Current ranges - Manual or Auto Programmable Hi-Lo alarm with memory of 20 readings Auto-display of: • Hi (readings higher than Hi-Limit)• Lo (readings lower than Lo-Limit)• Pass (readings between Hi-Limit and Lo-Limit) Memory of 3000 sets of data Measure cable length in metric and imperial units Cummunicate with PC via USB or... | Milli-Ohm meter/Micro-Ohm meters |
|
|
|
LUT0188-MO-2013 HIGH PRECISION MILLIOHM METER | * Professional bench type milliohm meter.* 20 m /200 m /2 /20 /200 /2 K /20 K ohm.* 20,000 counts, Jumbo LCD with back light.* Hi / Lo warning, 4 wires terminals, Kelvin clips is included, 0.001 milliohm resolution.* Judgement output : Low/Good/High port, used for the automatic machine to select the components (good or no good).* Power : AC 110V or AC 220 V/AC230 V. | Milli-Ohm meter/Micro-Ohm meters |
|
|
|
CAX0135-CHAUVIN ARNOUX PEL113 (REPLACE OLD PEL103) POWER AND ENERGY LOGGER - CONTRACTORS KIT | SKU: CHAUPEL113PROKIT PEL113 power and energy logger with current sensors, leads and Dataview software Measure and records all data for energy consumption diagnostics Hard carry case for equipment protection Chauvin Arnoux PEL113 Power and Energy Logger - Contractors Kit The Chauvin Arnoux PEL113 Power Energy Logger - Contractors Kit is the ideal kit needed for successful energy monitoring. Included within the kit is of course the PEL 113 Power Energy Logger and also current... | Power analysers/Power meters |
|
|
|
FLU0755 - Fluke 1734/B - Three-Phase Electrical Energy Logger with Fluke Connect (EU/US Version) malaysia fluke distributor 1111
|
Fluke 1734/B - Three-Phase Electrical Energy Logger with Fluke Connect (EU/US Version) 600V CAT IV/1000V CAT III rated for use at the service entrance and downstream Power instrument directly from the measured circuit Automatically capture and log voltage, current, power, power factor, energy and associated values The new Fluke 1732 and 1734 Three-Phase Electrical Energy loggers introduce a new simplicity to discovering sources of electrical energy waste. Discover when and where energy... | Power analysers/Power meters |
|
|
|
LUT0163B-Benchtop Power Meter(Watt, VA, Power factor, ACV, ACA, DCV, DCA, VAr, Whr, ohms,)
|
0.1 W resolution ( <1000 W ), high precision and high resolution in the low watt range, good performance , for low power LED lamp watt measurement Supper large LCD, easy to read-out, display the Watt, Power factor, Voltage & Current value at the same time. Accept different kinds current input signal as direct input, inductive clamp probe or CT ( current transformer ). Auto range. Built-in peak hold & data hold function. RS-232 output interface. Power supply... | Power analysers/Power meters |
|
|
|
LUT0339-COMPLETE SD CARD KWH DATALOGGING 3-PHASE POWER ANALYSER/LOGGER W 3 X 1200A CLAMP - 2 YEARS WARRANTY
|
Features: •Analysis for 3 phase multi-power system, 1P/2W,1P/3W, 3P/3W, 3P/4W •Voltage & Current are the True RMS value. •True Power ( KW、MW、GW ) measurement. •Apparent Power ( KVA、MVA、GVA ) measurement. •Reactive Power ( KVAR MVAR、GVAR) measurement. •Watt-Hour ( WH、SH、QH、PFH ). •Power Factor( PF )、Phase Angle( Φ ). •Voltage measurement range : 10 to 600 ACV •Current measurement range: 0.2A to 1200 ACA. •Programmable CT ratio (1 to 600) and PT ratio... | Power analysers/Power meters |
|
|
|
LUT0298-COMPLETE ADVANCED SD CARD GRAPHICAL/ WAVEFORM DATALOGGING 3-PHASE POWER & HARMONICS ANALYSER W 3 X 1200A CLAMP
|
Features: •Analysis for 3 phase multi-power system, 1P/2W, 1P/3W,3P/3W, 3P/4W •3 current probes ( CP-1201 ) are included, if change the current probes, the calibration procedures are not necessary •Current probe input signal/ranges with selection:Input signal (ACV):200 mV/300 mV/500 mV/1 V/2 V/3 VRanges (ACA) : 20 A/200 A/2000 A/30 A/300 A/ 3000 A. •Meter can cooperate the universal current probes •Measurement: V (phase-to-phase), V (phase-to-ground) A (phase-to-ground) KW / KVA /... | Power analysers/Power meters |
|
|
|
PRO0030-6830 All-Rounded Power and Harmonics Three and Single Phase Analyser | PRO0030 BASE UNIT POWER AND HARMONICS ANALYZER WITH 3 x 1000A CLAMPS Optional: PRO0041- 3 x 3000A Flexible Clamps Optional: PRO0038- 3 x 100A Clamps | Power analysers/Power meters |
|
|
|
ARH102-Smart Power Meter With Reports (WITH ETHERNET/RS-485)
|
Class 0.5 bi-directional energy and full power parameters measurement. Block or Rolling power demand measurement. THD, indivisual harmonics, and sag/swell power quality records. Data logging for alarm, sag, swell events with time-stamped. Report generation for daily and monthly power usage. Communication interfaces：Ethernet, RS485. Communication protocol：Modbus over TCP/IP for Ethernet, Modbus for RS485. Smart Power Meter with up to 4 channels of re-transmission... | Power analysers/Power meters |
|
|
|
DEN810-DENT USA RECORDING POWER METER WITH WIFI AND ANTENNA | Allow you to download data without opening the switch or junction box cover. Any one can steal your power meter until you have this! >> Measures, Stores and Analyzes 144 Different Electical Parameters Including Volts, Amps, Watts, Volt-Amps (VA), Volt-Amps Reactive (VAR), Kilowatts (kW), Kilowatt Hours (kHW), Power Factor and Harmonics through 63rd | Power analysers/Power meters |
|
|
|
FLI0082 -FLIR MR265 - MOISTURE METER AND THERMAL IMAGER WITH MSX | Moisture Meter and Thermal Imager with MSX All-in-one thermal camera, worklight, and pinless and pin moisture meter that meets RESNET standards Shows exactly where to investigate issues related to moisture, air leaks and insulation voids Clearly see areas of concern with a high-performance 160 × 120 thermal imaging sensor Easily identify both the context and the issue with MSX, which embosses visual details on full thermal images Target the exact source of problems with the integrated... | Thermal imagers/thermal camera (Infrared camera) |
|
|
|
FLI0061B-FLIR TG298 HIGH TEMPERATURE SPOT THERMAL CAMERA (160X120 IR RESOLUTION / BULLSEYE LASER | FLIR TG298 - High Temperature Spot Thermal Camera (160x120 IR Resolution / Bullseye Laser / 1080 C) High Temperature (1080 C) Spot Thermal Camera with Bullseye Laser IR Resolution 160 × 120 Object Temperature Range −25°C to 1080°C (−13°F to 1976°F) Display 2.4” color LCD, 320 × 240 pixels Field of View (H x V) 44° × 57° Patented MSX image enhancement for added detail and super resolution for upscaling thermal images Capture readings, images, and videos for analysis... | Thermal imagers/thermal camera (Infrared camera) |
|
|
|
FLI0061-FLIR TG268 (NEW TG267) SPOT THERMAL CAMERA (160X120 IR RESOLUTION / BULLSEYE LASER / THERMOC | IR Resolution 160 × 120 Object Temperature Range −25°C to 400°C (−13°F to 752°F) Display 2.4” color LCD, 320 × 240 pixels Field of View (H x V) 44° × 57° Patented MSX image enhancement for added detail and super resolution for upscaling thermal images Capture readings, images, and videos for analysis and sharing with the FLIR METERLiNK app Rugged IP54 rating and 2 m (6 ft) drop tested Bright LED flashlight Type K thermocouple FLIR TG268 IR Resolution 160... | Thermal imagers/thermal camera (Infrared camera) |
|
|
|
SEE016-SEEK FIREPRO 300 THERMAL CAMERA | With FirePRO 300, you can equip every firefighter with an affordable and lightweight thermal camera to enhance situational awareness and increase firefighter safety. Featuring our high-resolution 320 x 240 sensor, FirePRO 300 provides firefighters with the ability to regain orientation in low visibility or blackout smoke conditions. Additionally, Seek’s game-changing Mixed Gain technology allows firefighters to see detail in the hottest and coolest regions of the scene at the same time... | Thermal imagers/thermal camera (Infrared camera) |
|
|
|
FLU0757-FLUKE TC01B ISEE APPLE iOS MOBILE THERMAL CAMERA | Key features 256 x 192 pixels, detailed image quality, and 25 Hz frame rate for smooth video recording Up to 550 °C (1022°F), suitable to use in many applications 50 mK (0.05 °C) thermal sensitivity for fine differences and ± 2% or ±2 °C accuracy to ensure reliable results Customize image view with more than 10 standard or custom color palettes Compact design as light as 22 g | Thermal imagers/thermal camera (Infrared camera) |
|
|
|
FLU0757B-FLUKE TC01A (TC-01A) ISEE ANDROID MOBILE THERMAL CAMERA | Key features 256 x 192 pixels, detailed image quality, and 25 Hz frame rate for smooth video recording Up to 550 °C (1022°F), suitable to use in many applications 50 mK (0.05 °C) thermal sensitivity for fine differences and ± 2% or ±2 °C accuracy to ensure reliable results Customize image view with more than 10 standard or custom color palettes Compact design as light as 22 g | Thermal imagers/thermal camera (Infrared camera) |
|